Analysis of pulley installation details
2022-11-23
The belt pulley is one of the indispensable parts of the transmission equipment. The accurate installation of the pulley plays a vital role in the operation of the entire transmission equipment. Many people may be dismissive of the installation of the pulley and think it is very bad. Do you pay attention to the details of the pulley installation?
Belt pulley installation details:
Detail 1. When installing the belt pulley, pay attention to selecting the correct belt type and size. Accurate tool selection is a prerequisite for accurate installation.
Detail 2: Parts can be cleaned with gasoline after the installation of the belt pulley. The gasoline cleaning of parts can accurately ensure that the fitting surface of the belt pulley is damp and free of oil stains, and the friction is sufficient. In addition, it is prohibited to add lubricating oil at the place where the screw or pulley is locked to ensure the friction.
Coarse section 3. Clean the tools. The Allen wrench used to assemble the pulley should also be cleaned with gasoline and dried.
Coarse joint 4. Secure fixed positioning of pulley and cone sleeve: the pulley screws shall be locked tightly during installation to ensure that the cone sleeve receives uniform axial force. The belt pulley shall be installed stably to avoid the belt breaking or the belt pulley loosening and withdrawing during operation, which may cause far-reaching safety accidents.
Finally, the belt pulley cone sleeve is a non wearing part. After a short period of operation, the inner hole and chain slot may be damaged. After each assembly, check it and replace the spare parts immediately if any defects are found.
相关下载
Related News
2022-11-23
2022-11-23
The copyright Jinzhou Huayi Auto Parts Co., Ltd SEO
web：300.cn jinzhou.300.cn